Here is a kit that we've been asked about more and more. It's the DIY Complete Cycle Kit using X-otic Colours. This kit contains everything you'll need to paint your average cycle tanks and fenders*.... sandpaper, primer, sealer, basecoats, clearcoats, pearls even the essentials like sandpaper, strainers, gloves and measuring cups!

Now you can have a show stopping paint job
...for about the price of a night out on the town!

The DIY Complete Cycle Kit contains the following items to make your job complete:

Epoxy Primer
(8 oz of two parts each plus 2 oz Reducer)
NO Sealer required!
Basecoat (8 oz any color)
Imagin' (4 oz any color... marbled look)

Misty Pearl (1/4 oz any ice like color) -or-
Silver Satin Pearl (1/2 oz premixed)

Candy Concentrate (2 oz any color)
PB&J (inter-coat) Clear 8 oz
Production (High Build) Clear 16 oz
Sun Bloct (Final) Clear 8 oz
Catalyst 8 oz
Reducer (1 qt for cold, med or hot temps)

 

This kit also includes these important items like 10 lint-free strainers, 10 measuring cups and stir sticks, 1 tack rag, 3 pair Nitrile gloves , sandpapers (1 ea of various grits like 180, 240, 400 and 600 grits), micro finish sandpapers (1 ea of various grits like 1000, 1500, 2000 grits), 1 sanding block, masking tape. The X-otic Colours Application Directions has 40 pages of step-by-step procedures for all their fantastic products.

Then to top it all off we've included the incredible Flame Painting Video to help give you some great ideas. This video will be your guide through the entire process so you can do it yourself for a fraction of what it would cost otherwise. This is an excellent video for those just wanting to get started into this exciting field or for the experienced professional that wants to learn how-to fine tune his skills or raise them to a higher level.
 

Learn from the Kustom masters how to create flames on cars, motorcycles and other surfaces from design and layout to perfect execution. Clearcoat prep, tribal flames, tape layout techniques, fixing paint bleeds, flame drop shadows, pinstriping techniques are all included. You'll also learn freehand layouts, masking, creating flame balance removing a masking system, how to transfer designs, use of a pounce wheel and much more.

You'll get ALL these products in this amazing kit...
The Complete Cycle Kit  Only $359
On Special  Just $299

Please Specify Colors at Checkout


*Not to leave our 'ol bagger buddies out...
We'll DOUBLE ALL your amounts...
but NOT your CO$T!

The Complete Dresser Kit  Only $649
On Special  Just $579

Please Specify Colors at Checkout

If you were to purchase all the items in this kit individually and at full quantities (IE quarts, pints, packs, etc.) you could very easily spend two or three times this amount! Not to mention being stuck with one heck of a lot of leftovers!

Now you can have all the right amounts
 and at just the right price too!!!

Since these kits are tailored for your needs (IE. colors, designs, temperatures, etc.) we recommend sending us an Email at sales@innate.com so we can cover these items with you. You can also give us a call at (402) 651-6551 to go over your needs by phone as well.

Of course you'll have to supply a booth,
spray gun (see above), air supply and as always...
Use the appropriate safety equipment!!!
Be sure to follow all the manufacturers recommendations
as well as any local requirements for your specific area.