Jacquard Airbrush paints are specially formulated for airbrushing on practically any surface. This includes fabrics, leathers, woods, plastics, painted surfaces and even metals. Jacquard solid colors are bold and vivid, the transparent colors are true and clear and the metallic's sparkling and bright. They even come in very bright, eye popping fluorescents and mind blowing iridescent colors!  All these colors are intermixable so you can let your imagination run wild!

If you've been wanting to try something different or have just had issues with those other airbrush paints in the past, then this is your dream come true! Once dry, Jacquard Airbrush paints are permanent, indelible in water, and acid free. ASTM certified non-toxic so they much more user friendly than anything available. Since these paints are non-toxic and non-flammable we can ship anywhere in the world. These truly are ...

The Perfect Paints For The Beginner Or Pro!

Surface Preparation: All surfaces must be clean. Surfaces must be washed to remove dirt, waxes, sizings and conditioners. Non-porous surfaces, like metal and plastic, may require light sanding. Bare metal may require a primer. For durability, on hard surfaces, topcoat with clearcoat.

Application: Apply in light even coats. Avoid over-saturating the surface. Use approximately 40 psi and nib size should be no less that 0.5 mm. Paints are intermixable to get a full range of colors. Heat set paint with heat gun on hard surfaces. For fabric, heat set with a dry iron at appropriate setting for fabric for 30 seconds.

Clearcoat Instructions: (Optional) After airbrush paint has completely dried, spray clearcoat in a light even coat. Repeat, if desired, after first coat has thoroughly dried.

Tips for Airbrushing

• Before starting on your piece, check to make sure all of your equipment is working properly.

• Check for bent needle or tip and replace if necessary.

• Make sure that the compressor is functioning correctly and you have the air pressure adjusted to where you want it.

• Be sure you are using the correct size tip, especially with the Metallic Colors.
  

• Don't let colors sit too long in the airbrush without use, causing paint to dry in the airbrush.
  

• Place caps on bottles when not in use so they do not dry out.
  

• Dilute Colors with water to thin paints slightly.
  

• Be sure to clean your equipment thoroughly when you are finished.
  

• Transparent Colors are best on white and light colored or metallic surfaces.
  

• Opaque and Metallic Colors work on either light or dark surfaces