CounterAct Rust!

Our revolutionary electrostatic corrosion control systems are a family of devices so unique and novel that patents were granted not only on the devices themselves but on the actual process the devices employ. The unique CounterAct process of corrosion protection, "electrostatic corrosion control by capacitive coupling" is the only tested and proven purely electronic corrosion control process for minimizing corrosion in open air structures and vehicles.

The first of the CounterAct  electronic corrosion protection patents issued in the U.S. followed several years later by a similar patent in Canada. Others now are pending worldwide. We invented, pioneered and perfected the CounterAct "electrostatic corrosion control process utilizing capacitive coupling" and still hold all the patents on these devices and electronic corrosion protection processes. The truly unique quality of CounterAct corrosion protection is demonstrated by the nature of the original CounterAct patents which not only covers our electrostatic corrosion control devices but the actual  capacitive coupling process governing these devices as well.

Our Electrostatic Corrosion
Control Devices Consist of only
Three Primary Components:

1. A small pulsed DC power supply and control module (in the case of a typical passenger vehicle system about the size of a pack of cigarettes) is the heart of our corrosion proofing systems. The power supply is all solid state circuitry embedded in electronics grade (UL 94V-0 flame retardant) epoxy encapsulant  for long life and durability in any climate. On automobile and light trucks it is typically installed under the hood or in the trunk (wherever the battery is located ) where it runs off the 12V from the vehicle battery drawing less current than a typical digital clock. It a device so smart it actually detects a potential low battery condition and will shut itself off so the vehicle can still start.

Typical automobile size CounterAct corrosion
control power supply/control module.

2. A removable modular wiring harness with fused power lead to permit easy access to the power supply/control module for inspection or for easy transferability of our corrosion control devices to another vehicle.

CounterAct's capacitive coupling method uses a coupler with peel and stick aircraft grade adhesive that attaches right over the vehicle's paint.

3. One or more of our unique "programmed capacitive couplers". These capacitive couplers, which are attached to the protected metal surface with aircraft grade adhesive, are charged by the power supply/control module and function as if they were the positive half of a capacitor. They are wired to the power supply in parallel (each on individual circuits) and meticulously engineered so that each serves to produce a measured and specific limited range of capacitance and thus deliver a measured and specific limited range electrostatic charge via capacitive coupling. These  capacitive couplers are vital to the effectiveness of the system and we exercise the utmost care in their manufacture.

Together these three components serve to induce a negative electrostatic surface charge on the metal surface being protected (your vehicle's body for instance) thus capacitive coupling treats the metal body as if it were the negative half of a capacitor. This negative surface charge serves to interfere with the normal electrochemical corrosion processes that create corrosion on metals. The devices are sized according to the application and we have them to fit everything from ATV and motorcycles to Fleet Vehicles and RV's.

For a more thorough discussion of the complete corrosion process, CounterAct laboratory, field testing and third party evaluations over the past decades along with some of the constant flow of customer testimonials, please visit the website at:

www.COUNTERACTRUST.com

If you haven't heard or seen these before it's because they've been used mainly in heavy equipment such as snow plows and fire trucks as well as industrial environments like Utah's salt mines since 1987. In the harshest of climates they have proven time after time that they really do work... and continue to work very well year after year!

Now CounterAct has made these available to the general public. They manufacture these with the same exacting standards as their commercial grade devices. There's a perfect size for any vehicle be it an ATV, cycle, car, pickup, SUV, truck, tractor or even a trailer, from utility and boat trailers to semi sized! We have one that just right for your particular situation. At Innate Technologies we've used these ourselves on ALL our company and personal vehicles. We liked them so much we became a distributor for all of the CounterAct products and can now offer them direct to you!

Go To CHROMED CYCLE KIT